The Hot Shot combines the space and performance of a large kiln with the convenience of 120 or 240 Volt operation. The Hot Shot is very capable and offers the full range of firing operations.
The Hot Shot features the exclusive Set-Pro Controller beefy lid handle, full stainless jacket, properly sized stand and lid vent among others.
Chamber Dimensions: 14.5" Dia. x 6.5" Deep - 0.61 cu. ft.
The Hot Shot is designed to fire glass and is quite capable of all glass related firing up to 1650°F (900°C), such as painting, fusing, slumping, casting, etc. It should be noted that the Hot Shot is designed to fire a single layer or shelf. The nature of the Hot Shot is to provide heat from the lid elements directly to the shelf containing the glass. Attempting to fire glass below the top shelf is likely to lead to frustration and disappointment.
While the Hot Shot is designed exclusively for glass work it is possible to fire a variety of materials including metal clays, low fire ceramic, china paints and metals processing provided the firing temperatures do not exceed 1650°F.
Features, Specifications and Other Fun Stuff
The Hot Shot kiln
is available with the built-in Set-Pro, 3 button control.
14.5" Dia. x 6.5" Deep - 0.61 cu. feet
Voltage and Phase Configurations:
Agency Listings and Markings:
U/L listed and CU/L listed. CU/L is a Canadian Listing which is accepted by authorities in all Provinces.
© 2012 Indiana Ceramic Supply, Inc.
This page last updated on 02/07/2012