Evenheat Kiln HF 2327

HF 2327

Going for High Fire? Then go for the HF 2327. Designed and built with cone 10 in mind, the HF 2327 gets you there with ease and reliability. The chamber dimensions are "typical studio" while the specifications are anything but. All side walls and lid are made with 3" brick for greater efficiency at higher temperatures. The thermocouple is twice as thick for longer, high fire life. Add to this the reliable RampMaster II and you have one tough cone 10 kiln.

The HF 2327 is now supplied with Lift Assist which allows for easy, one handed operation of the lid. No struggling required!!

Recommended Kiln Furniture (Shelving & Posts):
Furniture Kit #7535

Order Here
Options	Retail	Your Price	Quantity
Deluxe Cone 10 capable 240V	~~$2715~~	$2172
Deluxe Cone 10 capable 240V 3 Phase	~~$2795~~	$2236
Deluxe Cone 10 capable 208V	~~$2715~~	$2172
Deluxe Cone 10 capable 208V 3 Phase	~~$2795~~	$2236
Controller Options
RampMaster II Controller		Included
Swing View		$30
RM II Handheld		$190
Set Pro (STP) Controller instead of RampMaster II		less $64
Furniture Kit
Furniture Kit #7535		$346

Features, Specifications and Other Fun Stuff

Lift Assist:

The Lift Assist is a spring loaded mechanism located at the hinge area of the HF 2327. Easy, one handed operation is entirely possible. Simply lift the lid and allow the lid prop rod to automatically fall into place, supporting the lid. We know you're going to love it, we do. The Lift Assist comes as standard equipment on the HF 2327.

Control Options:

The HF 2327 is standard equipped with the RampMaster II automatic control. The RampMaster II control is our full-featured, automatic temperature control. Multiple programs, multiple programming formats and all sorts of fun stuff make the RampMaster II one fine controller!!

Firing Chamber Dimensions and Options:

23.5" diameter x 27" deep - 7.0 cubic feet.

Voltage and Phase Configurations:

North American and Global Models:

240V single phase, 48A, 11,520W, USA NEMA 6-50R
208V single phase, 48A, 9984W, USA NEMA 6-50R
240V 3Ø (delta), 29A, 11,520W, Direct Wire
208V 3Ø (delta), 26A, 9984W, Direct Wire

NEMA 6-50R

Suitability:

2350°F (1288°C) Maximum temperature suitable for Ceramic, Porcelain, Pottery and China Firing. Rated for Cone 10!!

Shipping Weight:

330 lb.

Agency Listings and Markings:

U/L listed and CU/L listed. CU/L is a Canadian Listing which is accepted by authorities in all Provinces.
Currently the HF 2327 with Lift Assist or Swing View Option are not listed with U/L. If you desire a U/L listed HF 2327 please order without the the items.

Kiln Vent:

Evenheat offers the Orton Downdraft Vent System as an option.
The Orton Vent System is, by far, the finest kiln venting system available.

This page last updated on 04/04/2008