Cress Kiln B27HT / E27

B27HT / E27

The B27HT manual and E27 automatic kilns measure a full 7 cubic ft. Their dimensions are 23.38" Wide by 27" Deep. They are 10-sided kilns.

The B27HT has six independent temperature switches to control each heating element. This kiln uses the Dawson Kiln Sitter with Limit Timer to shut off the kiln when the desired temperature is reached. The kiln uses small pyrometric cones.

The E27 has a computer module that controls the temperature and timing of the firings.

These kilns come with a steel stand, and instruction manual, peephole plugs, two position lid-venting prop and a locking lid brace.

You can use these kilns for ceramics, porcelain, cone 5 stoneware, glass and other purposes.

Kiln Specifications
Inside Dimensions:	23.38" wide x 27" deep, 7 cu ft
Shipping Weight:	275-300 lbs, depending on options
Max Temp:	2350° F Cone 10
Electrical Specs:	Both: 240 volt 48 amp single phase or B27HT - 208 volt 33 amp 3 phase - NEMA 6-50R connector E27 - 208 volt 29 amp - WD-2CKS connector
Options:	240 Volt or 208 Volt 2.5" or 3" Brick (same inside dimensions) Single body or sectional construction Clean Air Exhaust System

Order Here
Options	Retail	Your Price	Quantity
B27HT Manual Kiln 240V, 48 Amp 2.5" Brick	~~$2075~~	$1660
B27HT Manual Kiln 208V, 33 Amp 3 phase 2.5" Brick	~~$2165~~	$1732
E27 Automatic Kiln 240V, 48 Amp 2.5" Brick	~~$2365~~	$1892
E27 Automatic Kiln 208V, 28 Amp 2.5" Brick	~~$2365~~	$1892
3" Brick Option for these kilns		$168
Sectional Construction Option for these kilns		$45
Clean Air Exhaust System for these kilns		$295
Furniture Kit FKDEKA		$240
Furniture Kit FKDEKAJR		$140

B27HT Manual Kiln

E27 Automatic Kiln Shown with Sectional Construction Option

Furniture Kits Available