Cress Kiln B24HT / E24HP

B24HT / E24HP

The B24HT (manual) and E24HP (automatic) kilns measure 5.8 cubic ft. Their dimensions are 23.38" wide by 22.5" deep, 10-sided kilns.

The B24HT uses two independent temperature switches are to control the heating elements. This kiln uses the Dawson Kiln Sitter with Limit Timer to shut off the kiln when the desired temperature is reached. The kiln uses small pyrometric cones.

The E24HP uses a computer module to control the temperature and hold times of the kiln.

These kilns come with a steel stand, an instruction manual, peephole plugs, two position lid-venting prop and a locking lid brace. Three year factory warranty.

You can use these kilns for ceramics, porcelain, cone 5 stoneware, glass, and other purposes.

Kiln Specifications
Inside Dimensions:	23.38" wide x 22.5" deep, 5.8 cu ft
Shipping Weight:	210-245 lbs, depending on options
Max Temp:	2250° F Cone 6
Electrical Specs:	240 volt or 208 volt NEMA 6-50P connector
Options:	240 volt or 208 volt 2.5" or 3" Brick (same inside dimensions) Single body or sectional construction Clean Air Exhaust System

Order Here
Options	Retail	Your Price	Quantity
B24HT Kiln 240V, 36Amp 2.5" Brick	~~$1880~~	$1504
B24HT Kiln 208V, 44 Amp 2.5" Brick	~~$1880~~	$1504
E24HP Kiln 240V, 48Amp 2.5" Brick	~~$2255~~	$1804
E24HP Kiln 208V, 29 + 24 Amp 2.5" Brick	~~$2255~~	$1804
3" Brick Option for these kilns		$184
Sectional Construction Option for these kilns (2 sections)		$40
Clean Air Exhaust System for these kilns		$295
Furniture Kit FKDEKA		$240
Furniture Kit FKDEKAJR		$140

<
B24HT Manual Kiln

<
E24HP Automatic Kiln

Furniture Kits Available