Cress Kiln
B1814HP Manual
E1814 Automatic

B1814HP / E1814

The B1814HP (manual) and E1814 (automatic) are 7-sided kilns having an inside area of 1.8 cubic ft. The inside dimensions are 14.38" wide by 18" deep. Brick thickness is 2.5". These kilns will run on both 208 and 240 volts, 24 amps, without modification.

The B1814HP uses two variable temperature control knobs.This kiln uses the Dawson Kiln Sitter with Limit Timer to shut off the kiln when the desired temperature is reached.

The E1814 uses a computer control module that sets the temperature levels and timing.

Theise kilns will fire up to 2350° F cone 10.

These kilns include an extra strong locking lid brace and hinge, a steel safety bottom plate, instruction manual, peephole plug and two position lid venting prop.

These kilns have many uses. Since they will fire up to cone 10, it is good for glass, ceramics, porcelain, stoneware, etc. Three year factory warranty.

Kiln Specifications
Inside Dimensions: 14.38" wide x 18" deep, 1.8 cu ft
Shipping Weight: 120 lbs
Max Temp: 2350° F Cone 10
Electrical Specs: 208 or 240 volt 24 amp NEMA 6-30R

one piece or sectional design
Clean Air Exhaust System
B1814HP only - 2.5" or 3" Brick

$", $kilnprice['B1814HP-240'], "", "\n$", $kilnprice['E1814'], "", "\n
Order Here
Options Retail Your Price Quantity
B1814HP Manual Kiln
208/240 Volt, 24 Amp
2.5" Brick
", "\n$"; printf('%01.2f',$kilnprice['B1814HP-240']*.8); ?>
E1814 Automatic Kiln
208/240 Vot, 24 Amp
2.5" Brick
", "\n$"; printf('%01.2f',$kilnprice['E1814']*.8); ?>
Sectional Design Option
(2 sections)
  $ "; printf('%01.2f',$kilnprice['SECTIONAL_OPTION']); ?>
3" Brick Option for the B1814HP Kiln   $ "; printf('%01.2f',$kilnprice['3_IN_BRICK_OPTION']); ?>
FKHEPTA Furniture Kit   $ \n"; ?>
Clean Air Exhaust System   $ \n"; ?>

B1814HP Manual Kiln

E1814 Automatic Kiln

© 2007-2015 Indiana Ceramic Supply, Inc.

This page last updated on 11/30/2018